Add products by adding codes
Set of adjustable steel rear axle control arms Toyota GR Supra MKV A90 / A91 - Uniball – 8 pcs.
- A complete kit of 8 adjustable rear axle control arms (4 pairs) for Toyota GR Supra MKV (A90 / A91).
PMC Motorsport Set of Adjustable Forged Steel Rear Control Arms Toyota GR Supra MKV (A90 / A91) with Uniball Rod Ends – Full Set of 8 pcs
A complete kit of 8 adjustable rear axle control arms (4 pairs) for Toyota GR Supra MKV (A90 / A91). Manufactured using PMC Technik technology: forged monoblock links with CFT cold-rolled threads and 40HM Uniball spherical rod ends with PTFE liners. The set replaces all adjustable rear suspension arms, enabling comprehensive suspension alignment – toe, camber, and wheel positioning – optimized for coilovers, circuit racing, drifting, or time attack.
Benefits for You
- Complete rear axle alignment control – one full set replaces all four pairs of control arms, allowing independent toe and camber adjustments without factory adjustment range constraints.
- Weldless forged monoblock links – forged from a single billet of steel with zero welds and no heat-affected zone (HAZ), delivering a 6:1 safety factor under dynamic loads.
- CFT cold-rolled threads – up to 30% higher tensile strength than cut threads, with surface roughness of Ra ≤ 0.8 µm ensuring smooth adjustments even after years of harsh use.
- 40HM Uniballs with PTFE liners – heat-treated 42CrMo4 / AISI 4140 chromoly steel housing, self-lubricating design operating reliably from −50°C to +150°C.
- Direct handling with zero play – Uniball spherical bearings eliminate factory rubber bushing deflection, maintaining fixed geometry under extreme acceleration, braking, and cornering loads.
- Durable powder coating – white powder-coated finish protects high-grade steel against corrosion, debris, and road salt.
- Plug & play installation – direct replacement bolting straight into factory mounting locations without chassis modifications.
- Manufactured in Poland with strict quality control – every component is CNC-machined and inspected prior to dispatch.
KIT CONTENTS
- Rear upper trailing arms – 2 pcs, replacement for Toyota OE 48770-WAA01 (left) / 48770-WAA02 (right), OE length 238 mm / 9.37", adjustment range 224–250 mm / 8.82"–9.84" – rear axle geometry correction
- Rear toe control arms (toe links) – 2 pcs, replacement for Toyota OE 48705-WAA01, OE length 440 mm / 17.32", adjustment range 434–460 mm / 17.09"–18.11" – rear toe alignment
- Rear trailing arms (traction links) – 2 pcs, replacement for Toyota OE 48711-WAA01, OE length 330 mm / 12.99", adjustment range 315–341 mm / 12.4"–13.43" – geometry correction and rear stability under load
- Rear upper control arms (camber arms) – 2 pcs, replacement for Toyota OE 48790-WAA01, OE length 288 mm / 11.34", adjustment range 270–296 mm / 10.63"–11.65" – rear camber adjustment
TECHNICAL INFORMATION
- type: complete adjustable rear control arm set, 4 pairs (8 pcs)
- links: forged monoblock, steel, Rm 470–630 MPa, Re ≥ 355 MPa
- thread: M16x1.5 cold-rolled (CFT)
- joints: Uniball M16x1.5, 40HM (42CrMo4 / AISI 4140), Rm 900–1100 MPa, PTFE liner, load rating 63 kN
- coating: powder coated, color: white
- OE replacements: Toyota 48770-WAA01, 48770-WAA02, 48705-WAA01, 48711-WAA01, 48790-WAA01
- intended use: coilover suspension, motorsport
APPLICATION:
Toyota GR SUPRA MKV (DB, A90 / A91) from 2019
- 2.0 Turbo B48 | DB21, DB22, DB23, DB26
- 2.0 Turbo B48 | DB81, DB82, DB86
- 3.0 Turbo B58 GR | DB01, DB02, DB03, DB06, DB92
- 3.0 Turbo B58 GR | DB41, DB42, DB43, DB45, DB46
- 3.0 Turbo B58 GR A90 Edition | DB05
Frequently Asked Questions
Which cars does this kit fit?
Toyota GR Supra fifth generation (MKV, A90 / A91, DB chassis code) with 2.0 Turbo B48 and 3.0 Turbo B58 engines, including the A90 Edition. The kit replaces all adjustable rear suspension arms: Toyota OE 48770-WAA01 / 48770-WAA02, 48705-WAA01, 48711-WAA01, and 48790-WAA01.
What is included in the kit?
4 pairs (8 pcs) of adjustable control arms comprising a complete rear axle set: rear upper trailing arms, rear toe arms (toe links), rear trailing arms (traction links), and rear upper control arms (camber arms).
Can I purchase these control arms individually?
Yes. Each pair of control arms in this kit is available separately. However, this full kit is the best choice if you need full alignment control over the entire rear axle.
Does installation require any modifications?
No. The arms bolt directly into factory mounting points. A full wheel alignment on a professional alignment rack is required after installation.
Is Uniball suitable for a daily driver?
Yes, although Uniball spherical bearings transfer more NVH to the chassis than soft factory rubber bushings. In return, they offer precise and consistent handling, making them ideal for sports, track, and drift setups.
Does the price include customs duty for shipments outside the European Union?
No. Product prices and shipping quotes do not include customs duties or import taxes that may apply in the destination country.
Can I buy with 0% VAT?
Yes, if you are a B2B customer outside Poland with a valid EU VAT number (verified via VIES) or if your order is shipped outside the EU.
PMC Motorsport parts are intended for motorsport use. Installation should be performed by a professional workshop, and wheel alignment must be adjusted after fitting.