Add products by adding codes
Rod end FLURO EA 10 – M10 male, right-hand, steel/steel bearing (uniball)
- Rod end FLURO EA 10: M10x1.5 right-hand male thread, 10 mm bore, load capacity 19.9 kN static / 8.1 kN dynamic, steel/steel bearing. 1 pc.
FLURO EA 10 Rod End – M10 Right-Hand Male Thread, 10 mm Bore, Steel/Steel Bearing
FLURO EA 10 is a rod end (also referred to as a rose joint, heim joint, spherical rod end, or threaded uniball) featuring an M10 right-hand external (male) thread and a 10 mm ball bore diameter. It supports a static load of up to 19.9 kN and a dynamic load of up to 8.1 kN. It operates on a steel/steel spherical plain bearing that requires lubrication.
This rod end belongs to the EA series manufactured by the German company FLURO-Gelenklager GmbH, built to dimension series E in accordance with DIN ISO 12240-4. This series is designed for high loads with alternating direction and for connections with limited installation space – series E rod ends are narrower than series K rod ends.
Key Specifications at a Glance
- Manufacturer: FLURO-Gelenklager GmbH (Germany)
- Manufacturer designation: EA 10
- Type: external (male) thread rod end, with steel/steel bearing
- Thread: M10 (1.5 mm pitch), right-hand
- Ball bore diameter: 10 mm
- Static load rating: 19.9 kN
- Dynamic load rating: 8.1 kN
- Sliding pair: steel / steel
- Lubrication: requires lubrication, without grease nipple
- Standard: DIN ISO 12240-4, dimension series E
- Sold as: 1 piece
Technical Specifications – FLURO EA 10
| Parameter | Value (Metric) | Value (Imperial) |
|---|---|---|
| Thread (G) | M10 male, right-hand | – |
| Ball bore diameter (d) | 10 mm | 0.39" |
| Outer head diameter (D) | 29 mm | 1.14" |
| Ball / inner ring width (W) | 9 mm | 0.35" |
| Housing / outer ring width (T) | 7 mm | 0.28" |
| Center of bore to end of shank (L) | 48 mm | 1.89" |
| Overall length | 62 mm | 2.44" |
| Thread length (GM) | 26 mm | 1.02" |
| Tilt angle | 12° in each direction (24° total) | – |
| Maximum static load (C0) | 19.9 kN | 4474 lbf |
| Maximum dynamic load (C) | 8.1 kN | 1821 lbf |
| Weight | 50 g | 0.11 lb |
| Lubrication | requires lubrication, without grease nipple | – |
Construction and Materials
Housing (body with threaded shank)
The size 10 housing is machined from free-cutting steel and zinc-plated for corrosion protection. In the EA series, housings up to and including size 10 are machined from free-cutting steel, while from size 12 upwards they are forged from C45 quenched and tempered steel.
Spherical plain bearing
A steel/steel spherical plain bearing of type GE..E operates inside the housing. This sliding pair handles high loads with alternating direction well, but requires lubrication.
Lubrication
The rod end does not have a grease nipple – in the EA series, grease nipples are only fitted from size 20 upwards.
Applications
EA series rod ends are used in linkages that transmit high loads with alternating direction while accommodating angular misalignment. Typical applications for the M10 size include:
- control rods and lever mechanisms,
- pneumatic cylinders and automation systems,
- adjustment mechanisms in machinery,
- light tie rods and links in structural assemblies,
- connections with limited installation width.
Selecting a rod end for a specific joint must account for actual operating loads and an appropriate safety factor – this is the responsibility of the design engineer or installer.
Installation Guidelines
- A 10 mm (M10) bolt or pin passes through the ball bore.
- Secure the threaded shank using an M10 jam nut.
- The threaded shank should be engaged to a minimum depth of 1.5 times the thread diameter, i.e., at least 15 mm.
- The steel/steel bearing requires lubrication – do not operate it dry.
- To utilize the full tilt angle, use conical misalignment spacers on both sides of the ball.
Frequently Asked Questions
What thread does the FLURO EA 10 rod end have?
The FLURO EA 10 rod end has an M10 external (male), right-hand thread. The thread length is 26 mm.
What bolt size fits the EA 10 bore?
The ball bore diameter is 10 mm, so it accommodates an M10 (10 mm) bolt or pin.
What load can the FLURO EA 10 handle?
The maximum static load rating is 19.9 kN (4474 lbf), and the dynamic load rating is 8.1 kN (1821 lbf).
Does the EA 10 rod end require lubrication?
Yes. The rod end operates on a steel/steel bearing that requires lubrication. The rod end does not have a grease nipple – in the EA series, grease nipples are only fitted from size 20 upwards.
What is the difference between EA 10 and EA 10 D?
EA 10 has a steel/steel bearing that requires lubrication, whereas EA 10 D has a maintenance-free bearing. The mounting dimensions of both versions are identical.
What is the difference between EA 10 and EAL 10?
EA 10 has a right-hand thread, whereas EAL 10 has a left-hand thread. Using a pair of right-hand and left-hand rod ends on a single linkage rod allows you to adjust its length without disassembly.
What is the tilt angle of the EA 10 rod end?
The ball tilts 12° in each direction, for a total of 24°.
What materials is the FLURO EA 10 made of?
The housing is machined from free-cutting steel and zinc-plated, and a steel/steel spherical plain bearing of type GE..E operates inside the housing.
Is the price for a single piece?
Yes, the price is for 1 piece of the FLURO EA 10 rod end.