Stage 1 Toyota 1JZ 2JZ - 6-speed manual BMW N54 GS6-53BZ 135i 335i 535i - 240mm / 9.45"

PMC Motorsport Stage 1 – clutch kit Toyota JZ 1JZ 2JZ – 6-speed manual BMW N54 ZF GS6-53BZ 135i 335i 535i – 240 mm / 9.45" – Sachs XTend 3000 951 952 – max. 650 Nm / 479 lb⋅ft

Complete Stage 1 clutch kit allowing you to connect (swap / convert) a Toyota JZ 1JZ 2JZ engine with the manual 6-speed ZF GS6-53BZ transmission used in N54-powered BMWs. The kit includes a gearbox adapter plate, custom PMC Motorsport flywheel, and Sachs XTend 3000 951 952 clutch – self-adjusting pressure plate, sprung organic clutch disc, and release bearing with clutch fork. Maximum torque capacity of the kit is 650 Nm (479 lb⋅ft). An ideal solution for a daily driver, drift, as well as amateur and professional motorsport.

Planning a Toyota JZ 1JZ 2JZ engine swap in your BMW (E30, E36, E46, E34, E39, E90, E91, E92, E60, E61, E81, E82, E87)? Our adapter is a reliable solution. Replace your automatic transmission with a manual from a BMW and unlock new possibilities.

PMC Motorsport adapters not only enable automatic-to-manual conversions for Toyota JZ 1JZ 2JZ powered cars but also facilitate JZ engine swaps into BMWs and other vehicles like the Nissan (S13, S14, S15, PS13) or Mazda RX-7 / RX-8.

The aluminum gearbox adapter plate is designed to simplify transmission installation to the maximum, avoiding radical modifications like cutting off the entire bellhousing – you only need to clearance the starter motor opening. Custom flywheels dedicated to PMC Motorsport adapters are made of aluminum with a replaceable friction surface, and are inspected and balanced before shipping. The flywheel is designed for a 240 mm type pressure plate (GS5-39DZ / GS6-53DZ / BZ BMW OE). Flywheel weight: 5.4 kg (11.9 lbs), adapter plate thickness: 20 mm (0.78").

PMC Motorsport gearbox adapters are synonymous with precision and premium quality. A design process based on 3D scanning and inspection using a coordinate measuring arm ensure a perfect fit. Production on modern CNC machines guarantees ideal concentricity between the engine and transmission, which is crucial for the longevity of the drivetrain.

Additional information

Installation Instructions

To install the flywheel, you must use the flexplate (ring gear) from an automatic Toyota OE 32101-30090 or 32101-22050, along with a 4.5 mm spacer between the engine block and the flexplate, Toyota OE 32116-22020 (not included in the kit). The flywheel is bolted to the crankshaft using the included bolts, torqued to 72 Nm (53.1 lb⋅ft) with threadlocker applied. The clutch fork from the Sachs XTend kit must be mounted in the lower position on the release bearing (if using a two-position bearing). To install the adapter, you must use a Toyota JZ starter motor without an additional pinion shield – see the FAQ section for details.

Frequently Asked Questions

Which engines fit this kit?

Toyota JZ family engines: 1JZ (1JZ-FSE, 1JZ-GE, 1JZ-GTE) and 2JZ (2JZ-FSE, 2JZ-GE, 2JZ-GTE), in both VVT-i and non-VVT-i versions.

Which gearboxes fit this kit?

The 6-speed manual ZF GS6-53BZ from N54-powered BMWs in HGX, JGD, JGF, JGK variants (E60 535i, E9x 335i, E8x 135i, Z4 35i), and GS6X53BZ HGY.

Do I need to cut the transmission bellhousing?

No. The adapter is designed to avoid cutting the bellhousing – you only need to clearance/prepare an opening for the starter motor.

What additional parts do I need to purchase for installation?

The flexplate (ring gear) from an automatic Toyota 1JZ / 2JZ, OE 32101-30090 or 32101-22050, and one 4.5 mm spacer between the engine block and flexplate, Toyota OE 32116-22020. You also need a clutch slave cylinder specific to your transmission and a Toyota JZ starter motor (see question below). These parts are not included in the kit.

Which clutch is included in the kit?

Sachs XTend 3000 951 952 with a 240 mm (9.45") diameter: self-adjusting pressure plate, sprung organic clutch disc with a 32.5x35-26N spline (26 teeth) suited for the ZF GS6-53BZ gearbox, and release bearing with clutch fork.

How much torque can the Stage 1 kit handle?

The maximum torque capacity of this kit is 650 Nm (479 lb⋅ft).

Can I use a different clutch?

Yes. The PMC Motorsport flywheel is designed for a 240 mm BMW OE type pressure plate – from BMW M57 / M57N / M57N2 / N54 / B58 / E46 M3 or Sachs Performance 883082.001243. Custom clutches like ACT / Spec / Tanaci are also frequently used – the custom pressure plate must match the BMW OE flywheel mounting pattern (M57 / M57N / M57N2 / N54 / B58).

Which starter motor should be used?

A Toyota JZ starter motor without an additional pinion shield. Installation depends on the adapter version:

a) Adapters manufactured up to 2022 – the starter is mounted identically to original equipment (OE);

b) Adapters manufactured from 2022 to 2025 – one of the starter mounting holes in the engine block must be drilled out to ∅12.9–13.2 mm (0.507"–0.520") to a depth of 22 mm (0.866"), then insert the sleeve provided in the AN 335-M10 kit and bolt it using an ISO 4762-M10x35 bolt;

c) Adapters manufactured from January 2025 onwards – the lower mounting hole in the starter motor must be enlarged to ∅12–13 mm and the engine block threaded to M12x1.5.

Does the adapter also fit the ZF 8HP automatic transmission?

Yes. The PMC Motorsport transmission adapter plate itself is universal and fits most BMW gearboxes (applies to adapters manufactured after 2022). When converting to a ZF 8HP automatic transmission, the standard flywheel must be replaced with the PMC Motorsport 8HP torque converter adapter.

What is included in the kit?

Aluminum gearbox adapter plate with mounting bolts, custom PMC Motorsport flywheel with a replaceable friction surface (5.4 kg / 11.9 lbs), crankshaft bolts, pressure plate mounting bolts, clutch fork pivot pin – a replacement for BMW OE 21 51 1 223 328 – and the Sachs XTend 3000 951 952 clutch kit (pressure plate, disc, release bearing with clutch fork).

Can I purchase only the adapter or only the flywheel?

Yes. Every element of the kit is available separately – including just the adapter plate with flywheel, without the clutch.

Does the price include customs duty for shipments outside the European Union?

No. Product prices and shipping quotes do not include customs duties or import fees that may apply in the destination country.

Can I buy with 0% VAT?

Yes, if you are a B2B customer outside Poland with an active EU VAT number (verified via VIES) or if the order is exported outside the EU.

Are the included instructions sufficient for complete installation?

The manual covers mating the engine to the transmission outside the vehicle. Depending on the car, extra modifications may be required (mounts, bushings, firewall, transmission tunnel, driveshaft length). We recommend installation by professional technicians.

Please note that a lightweight rigid single-mass flywheel delivers uncompromised throttle response at the expense of factory dampening elements. This results in a more direct drivetrain connection, which may naturally increase gear noise transmission from the gearbox. This is an expected and desirable characteristic in performance vehicles resulting from a solid engine-drivetrain link.