Add products by adding codes
G4X Monsoon Wire-In Bundle - ECU + Loom + Sensors
- The Link G4X Monsoon Wire-In Bundle is an engine management kit for 4-cylinder engines, including the MonsoonX ECU, a 2.5 m wiring loom, and temperature and pressure sensors.
G4X Monsoon Wire-In Bundle. Everything you need to get started with wiring a Link G4X MonsoonX ECU into your chosen vehicle.
This bundle is ideal for four-cylinder engines requiring a few additional features.
- G4X MonsoonX ECU
- Medium A Loom - 2.5 m wiring harness for G4X ECUs (MonsoonX)
- Intake Air Temperature Sensor
- Coolant Temperature Sensor
- Pressure Sensor
Bridging the gap between entry-level and mid-range ECUs, the MonsoonX delivers advanced tuning and motorsport features in a compact and versatile package.
Sharing the same championship-winning G4X architecture as the rest of the range, the MonsoonX guarantees the same proven tuning experience and reliability trusted by enthusiasts and professional tuners worldwide.
The MonsoonX shares the same processor, firmware, PC software and standard G4X feature set found throughout the G4X range. These features include CAN bus communication, Flex Fuel, configurable engine protection limits, CAN keypad control, open-loop and closed-loop boost control, dual closed-loop Lambda control, VVT control, a built-in Trigger Oscilloscope, aftermarket dash compatibility and 512 MB of onboard data logging memory. It also features a built-in MAP sensor.
Building on the capabilities of the AtomX, the MonsoonX adds extra auxiliary (Aux) outputs, digital and analog inputs, and advanced tuning and motorsport features. Depending on your input/output (I/O) requirements, features such as Launch Control, Anti-Lag, Gear Shift Control, Paddle Shift Control and VVT Control allow you to configure the ECU to meet the individual needs of your project.
The MonsoonX is an ideal solution for naturally aspirated and turbocharged engines requiring advanced tuning and motorsport features without the need to upgrade to a higher-end ECU from the Link range.
Note: The MonsoonX can support any of the above features, but not all simultaneously. The number of features that can be enabled depends on how many of the limited available inputs and outputs each feature requires.
Supported Engine Configurations |
The MonsoonX can control up to 2 rotors (Wankel) or 4 cylinders with sequential injection and direct ignition. |
Features
The MonsoonX combines all standard G4X features with selected advanced tuning and motorsport features, including:
ECU Features |
Built-in MAP Sensor 8 Custom Math Blocks (up to 30 characters) Flex Fuel (ethanol fuel support) Trigger Oscilloscope Configurable Engine Protection Limits CAN Keypad Control VVT Control Open-Loop Boost Control Closed-Loop Boost Control Built-in Lambda Sensor Control Dual Closed-Loop Lambda Control Compatibility with all leading aftermarket dashes via CAN bus or serial port. 512 Megabytes of Onboard Data Logging Memory |
Motorsport Features |
Launch Control Anti-Lag System Gear Shift Control Paddle Shift Control Note: The MonsoonX can support any of the above features, but not all simultaneously. The number of features that can be enabled depends on how many of the limited available inputs and outputs each feature requires. |
Technical Specifications
The MonsoonX combines all the core specifications of the AtomX with additional inputs/outputs (I/O), including:
Outputs |
4 Injector Drives 4 Ignition Drives 6 Auxiliary (Aux) Outputs +5V Sensor Power Supply Unused injector/ignition outputs can be used as auxiliary outputs |
Inputs |
4 Digital Inputs 2 Temperature Inputs 4 Analog Inputs 2 Trigger Inputs 1 Knock Sensor Input Unused temperature and analog inputs can be used as digital inputs |
Communication |
1 CAN Bus Channel Mini-B USB Tuning Connector |
Data Logging |
512 MB of Onboard Data Logging Memory Maximum Combined Logging Rate: 100 kHz 250 Logging Channels |
Product Dimensions |
95 mm (L) x 130 mm (W) x 45 mm (H) 3.74 in (L) x 5.12 in (W) x 1.77 in (H) |
Product Weight |
220 grams (7.76 ounces) |
Material |
Glass-Filled Nylon Enclosure |
Electrical Specifications |
Operating Voltage Range: 6.5-24V Maximum Input Voltage: 36V Maximum Continuous Current Draw: 3A Operating Current: 200mA |
Miscellaneous |
ISO 13485 Manufacturing Standard Ambient Temperature Range: -30 to 90°C |
Kit Contents |
MonsoonX G4X ECU Quick Start Guide Mounting Bracket USB Tuning Cable LinkECU Stickers |
Connector |
Superseal 4 Rows, 34 Positions Part Number 4-1437290-0 |